Ash Wood WPC Fluted 3D Wall Panels | 49.8 sq. ft./Box

Mid-tan ash – the middle of the warm wood range.

Ash Wood is a mid-tan with an even, closely spaced grain and no strong figuring. It sits exactly between the pale oaks and the brown walnuts, which makes it the tone to use when Natural Oak reads too light and Walnut reads too dark.

It is also the most forgiving colour to match to existing timber flooring, because it carries no strong red or grey bias to clash with.

Best for

• Living room, bedroom, and dining room feature walls
• TV and media walls, with or without concealed LED lighting
• Hallways, stairwells, and ceiling runs
• Offices, receptions, hotels, restaurants, and retail fit-outs

Why WPC fluted panels

• Fluted 3D profile — deep shadow gaps that change with the light
• Lightweight WPC core — a full panel is about 5.4 lb
• Moisture and termite resistant — suited to bathrooms and basements
• Low maintenance — wipes clean, no oiling or resealing
• Fix with adhesive or concealed clips — over drywall, battens, or masonry
• Cuts with a fine-tooth blade — trims to height on site
• Matching aluminium trims available for edges, corners, and joints

Specifications

Care & Maintenance

Dust along the flutes with a soft brush or vacuum brush head, and wipe marks with a damp cloth and a cleaner suitable for WPC. Test any unfamiliar cleaner in an inconspicuous area first. No oiling, waxing, or resealing is needed.

Shipping & Ordering

Sold by the single panel or by the box of 10. One box covers 49.8 sq. ft. To estimate quantity, divide your wall width in inches by 6.3 and round up — then add one panel for cuts. Panels ship banded and film-wrapped. Order a sample first if you are matching to existing timber.